论文部分内容阅读
1.单渣炼钢工艺 所谓单渣炼钢工艺就是当氧化期完成之后,立刻采用沉淀脱氧的方式进行强制性脱氧,从而代替长时间的扩散脱氧,使整个还原时间缩短30～50min。 单渣炼钢多指在氧化渣下出钢的单渣工艺。但也有在还原渣下出钢的单渣工艺。还原渣下出钢的单渣工艺是指氧化完成后不扒渣立刻进行强脱氧,把氧化渣直接变成还原渣,从而避免了扒渣时的热损失,并 1.单渣炼钢工艺 所谓单渣炼钢工艺就是当氧化期完成之后,立刻采用沉淀脱氧的方式进行强制性脱氧,从而代替长时间的扩散脱氧,使整个还原时间缩短30～50min。 单渣炼钢多指在氧化渣下出钢的单渣工艺。但也有在还原渣下出钢的单渣工艺。还原渣下出钢的单渣工艺是指氧化完成后不扒渣立刻进行强脱氧,把氧化渣直接变成还原渣,从而避免了扒渣时的热损失,并
1. The single slag steelmaking process The so-called single slag steelmaking process is that when the oxidation period is completed, the method of deoxidation is used immediately to perform mandatory deoxidation, thereby replacing the long-time diffusion deoxidation, the reduction time is shortened by 30 ~ 50min. More than a single slag steel slag in the slag under the slag of a single slag process. However, there is also a single slag process for tapping the slag. Reduce slag slag under a single slag process refers to the completion of the oxidation is not slag immediately after strong deoxidation, the oxide slag directly into the reduction of slag, so as to avoid the loss of slag heat loss, and 1. The single slag steelmaking process The so-called The single-slag steelmaking process is that when the oxidation period is completed, the deoxidation method is adopted to perform mandatory deoxidation immediately, so as to replace the long-term diffusion and deoxidation, thereby shortening the entire reduction time by 30 to 50 minutes. More than a single slag steel slag in the slag under the slag of a single slag process. However, there is also a single slag process for tapping the slag. Reduce slag slag under a single slag process refers to the completion of the oxidation is not slag immediately after strong deoxidation, the slag directly into the reduction of slag, so as to avoid the loss of heat slag and