论文部分内容阅读
500立方米倒锥形稳压水塔是我国目前最大容重的例锥形水塔,已在上海自动化仪表研究所提升成功,就位安装。其主体结构采用液压滑模和液压提升工艺,它是现浇钢筋混凝土结构两种行之有效的快速施工工艺的组合,促进施工工艺的改革,具有机械化程度高,占地面积小,节省木材,降低成本,缩短工期,减少高空作业等显著特点,二者结合能相辅相成,进一步发挥各自的技术经济效果。一、概况水塔高度为35.95米,基础埋入深度—3.10米,采用桩承、板式基础,共打下450×450方桩29根,长度27米。基础直径为11.8米,园柱式筒身底部因考虑到大小口径管道弯向改为六根立柱,通过柱顶环梁,连成整
The 500 cubic meter inverted conical water tower is the largest example of conical water tower in China. It has been successfully upgraded in Shanghai Institute of Automation Instrumentation and installed in place. Its main structure adopts hydraulic sliding mode and hydraulic lifting technology. It is a combination of two effective rapid construction technologies for cast-in-place reinforced concrete structures, promotes the reform of construction technology, has a high degree of mechanization, covers an area small, saves wood, Reduce the cost, shorten the construction period, reduce the significant features such as high-altitude operations, and the combination of the two can complement each other and further exert their respective technical and economic effects. I. Overview The water tower has a height of 35.95 meters and a basic buried depth of -3.10 meters. It adopts a pile bearing and slab foundation and lays a total of 29 square roots of 450 x 450 square piles. The base diameter is 11.8 meters, and the bottom of the cylindrical column is changed to six columns due to the consideration of the bending of the large and small diameter pipes, and the entire column is completed by the column top ring beam.