This work was undertaken to investigate the behaviors and kinetics of toluene adsorption and desorption on activated carbons with varying pore structure.Five kinds of activated carbon from different raw materials were selected.Adsorption isotherms and breakthrough curves for toluene were measured.Langmuir and Freundlich equations were fitted to the equilibrium data,and the Freundlich equation was more suitable for simulating toluene adsorption.The process consisted of monolayer,multilayer and partial active site adsorption types.The effect of the pore structure of the activated carbons on toluene adsorption capacity was investigated.The quasi-first-order model was more suitable for describing the process than the quasi-second-order model.The adsorption data was also modeled by the intal particle diffusion model and it was found that the adsorption process could be divided into three stages.In the extal surface adsorption process,the rate depended on the specific surface area.During the particle diffusion stage,pore structure and volume were the main factors affecting adsorption rate.In the final equilibrium stage,the rate was determined by the ratio of meso-and macro-pores to total pore volume.The rate over the whole adsorption process was dominated by the toluene concentration.The desorption behavior of toluene on activated carbons was investigated,and the process was divided into heat and mass transfer parts corresponding to emission and diffusion mechanisms,respectively.Physical adsorption played the main role during the adsorption process.