【摘 要】
：
To investigate the impact of an opening and joints with different inclination angles on the mechanical response behavior, the energy evolution characteristics, and distribution law of granite specimens, uniaxial loading tests were performed on the paralle
【机 构】
：
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 1000
【出 处】
：
International Journal of Minerals, Metallurgy and Materials
论文部分内容阅读
To investigate the impact of an opening and joints with different inclination angles on the mechanical response behavior, the energy evolution characteristics, and distribution law of granite specimens, uniaxial loading tests were performed on the parallel jointed rock samples with an opening. Results indicated an initial decreasing trend of the strength and deformation parameters, which later increases with increased inclination angle, reaching minimum values when the inclination angle is 45°. Evolution curves of the elastic strain energy and dissipated energy with strain of the samples showed step-like gradual mutation characteristics. The peak total energy, peak elastic strain energy, peak dissipated energy, and total input energy during the failure of the samples showed significant nonlinear characteristics with increasing inclination angle. The opening and joints as well as the change of the inclination angle had significant influences on the proportion of the elastic strain energy of the samples prior to the peak, resulting in the difference of the distribution law of input energy. Moreover, the energy mechanism of the sample failure was discussed. Results showed that the energy release was the internal cause of the sudden destruction of the entire rock mass.
其他文献
The evolution of inclusions and the formation of acicular ferrite (AF) in Ca–Ti treated steel was systematically investigated after Mg and La addition. The inclusions in the molten steel were Ca–Al–O, Ca–Al–Mg–O, and La–Mg–Ca–Al–O after Ca, Mg, and La add
The evolution behavior of the γ″ phase of IN718 superalloy in a temperature/stress coupled field was investigated. Results showed that the coarsening rate of the γ″ phase was significantly accelerated in the temperature/stress coupled field. Based on the
Bimetal materials derived from transition metals can be good catalyst candidates towards some specific reactions. When loaded on graphene (GP), these catalysts exhibit remarkable performance in the hydrolysis of sodium borohydride. To obtain such catalyst
Nanoparticles of potassium ferrite (KFeO2) in this work were synthesized by a simple egg white solution method upon calcination in air at 773, 873, and 973 K for 2 h. The effects of calcination temperature on the structural and magnetic properties of the
The optimized growth parameters of graphene with different morphologies, such as dendrites, rectangle, and hexagon, have been ob-tained by low-pressure chemical vapor deposition on polycrystalline copper substrates. The evolution of fractal graphene, whic
This study explores the fabrication of Fe-based amorphous/crystalline coating by air plasma spraying and its dependency on the coating parameters (plasma power, primary gas flow rate, powder feed rate, and stand-off distance). X-ray diffraction of the coa
Layered double hydroxides (LDHs) hinder corrosive elements by forming a double layer and locking them between its layers. Hence, LDHs are interesting materials in corrosion inhibition. In this work, Zn–Mg-based LDHs are grown over a copper substrate by us
In this study, Mg–9Al–1Si–1SiC (wt％) composites were processed by multi-pass equal-channel angular pressing (ECAP) at vari-ous temperatures, and their microstructure evolution and strengthening mechanism were explored. Results showed that the as-cast micr
The aim of this investigation was to prepare geopolymeric precursor from vanadium tailing (VT) by thermal activation and modific-ation. For activation, a homogeneous blend of VT and sodium hydroxide was calcinated at an elevated temperature and then modif
This paper presents an experimental investigation of the mechanical and tribological properties of Cu–graphene nanosheets (GN) nanocomposites. We employed the electroless coating process to coat GNs with Ag particles to avoid its reaction with Cu and the