目前,在我国现浇商品混凝土楼板模板拆除施工中,经常是钢撬棒直接插入模板缝隙中强行撬挖,往往导致胶合板板边破损,严重影响模板的周转次数,造成了极大的浪费。通过使用一种新型拆模器解决了传统施工方法的弊端,提高了拆模的质量和速度,大大减少了模板拆除过程中对对模板的破坏,拆模器在安装拆除过程中,操作简单,安全性能好,能显著节约模板费用,降低生产成本并缩短工期。现场施工安全性得到较大提高,且施工难度降低,工人易操作,具有广阔的应用前景。 At present, in the construction of cast-in-place concrete floor slab in our country, often the steel crowbar is inserted directly into the gap of the formwork to forcibly pry digging, often resulting in plywood edge damage, which seriously affects the turnover of formwork, resulting in great waste. The utility model solves the defects of the traditional construction method by using a new type of demolisher, improves the quality and the speed of the demolding, greatly reduces the damage to the template in the template demolishing process, and the operation of the demolisher in the process of installation and disassembly is simple, Safety performance, can significantly save the template costs, reduce production costs and shorten the construction period. On-site construction safety has been greatly increased, and the difficulty of construction reduced, workers easy to operate, has broad application prospects.