论文部分内容阅读
我厂有四台φ1650圆锥破碎机已使用二十多年。由于机座与碗形轴承架相对运动摩擦,设备多次拆卸检修,使两者相配合的止口出现了较大的间隙,漏油严重。每月要向每台油箱补添机油百余斤,每年白白浪费机油四千多斤,并严重影响选铜、选钴指标。为此,曾采取多种措施,均无济于事。后经认真分析漏油的原因:碗形铜瓦的回油流落在大伞齿轮上,随着大伞齿轮的旋转,其上面的机油恰好甩
I have four factory φ1650 cone crusher has been used for more than 20 years. Due to the relative motion friction between the base and the bowl-shaped bearing frame, the equipment is repeatedly disassembled and overhauled so as to make the gap between the two coincide with a larger gap, which causes serious oil spills. Every month to fill each tank to add oil 100 jin, a year wasted oil more than four thousand kilos, and seriously affect the election copper, cobalt indicators. For this reason, it has not been possible to take any number of measures. After careful analysis of the reasons for the oil spill: bowl-shaped copper tile back to the big bevel gear gear, with the rotation of the big bevel gear, the oil just above rejection