连接片就是一个接线片,它是把应变片与引出线相连接的元件。在以往的应变测量中,应变片的引线和引出的屏蔽线是直接相连的。为了防止长长的屏蔽线拖断应变片的引线,采用了许多保护措施,如橡皮膏贴、胶皮绑或胶带扎的办法。其缺点是:绑得过紧就会弄断应变片的引线;固定不可靠就会在测量中形成引线被折断的现象。尤其是由于这些保护措施使机件表面紊乱不堪,不但给涂防潮剂带来很大的困难,而且还会 The connector is a connector, which is the strain gauge and leads connected to the components. In the past strain measurement, the strain gauge leads and leads to the shield is directly connected. In order to prevent the long shield wire from dragging the lead of the strain gauge, many protective measures are adopted, such as sticking plaster, rubber banding or tape sticking. The disadvantage is: Tied too tight will break the strain gauge lead; fixed unreliable will lead in the measurement of the formation of the broken wire phenomenon. Especially due to these protective measures to disrupt the mechanical surface, not only to paint dampproofs bring great difficulties, but also