论文部分内容阅读
随着现代科学技术的发展,电装工作在指挥仪的试制加工和生产中占有相当重要的地位。一台指挥仪有成千上万个焊点。如果在焊接中疏忽大意,漏掉一个焊点,或者虽然焊了,但达不到要求,出现虚焊、假焊,这就会影响整机效能,造成机器的工作不可靠、不稳定,从而为武器装备带来不良后果。所以我们必须足够地重视电装工作的基本工艺,树立高度的责任心,认真地按工艺要求焊好每一个焊点。本工艺是经过几年来产品试制和小批量生产的实践,以及我们对产品加工工艺的要求,结合当前的客观情况制定出来的。它包括插件电装、底板焊按和整机装配等三个部分。现分别叙述如下。
With the development of modern science and technology, electrical installation occupies a very important position in pilot production and processing of the pilot. A conductor has thousands of solder joints. If the welding negligence, missed a welding spot, or although the welding, but not up to requirements, there Weld, fake welding, which will affect the performance of the machine, resulting in the work of the machine is not reliable, unstable and thus For the arms and equipment to bring adverse consequences. Therefore, we must attach sufficient importance to the basic process of Denso work, establish a high sense of responsibility, carefully according to process requirements soldering each solder joint. This process is after several years of product trial and small batch production practices, as well as our product processing technology requirements, combined with the current objective situation developed. It includes plug-in electrical equipment, welding machine and the whole floor assembly and other three parts. Now are described as follows.