论文部分内容阅读
一、前言高层建筑因建筑使用功能和结构要求一般设有地下室.具体层数根据甲方及实际情况确定。地下室顶板通常作为上部结构的嵌固部位即嵌固层,当不满足相关要求时.应将嵌固层往下移。1.5版YJK软件通过参数“嵌固端所在层号(层顶嵌固)”指定嵌固层的位置,如果地下室顶板为嵌固层.即嵌固层为地上一层.该参数可取地下室层数:如果基础顶面为嵌固层时.其取为0。结构设计
I. INTRODUCTION The high-rise building generally has a basement due to the function and structure requirements of the building. The specific number of floors is determined according to the Party A and the actual situation. Basement roof is usually used as the upper part of the embedded parts of the embedded layer, when not meet the relevant requirements, the embedded layer should be moved down. The 1.5 version of the YJK software specifies the location of the embedding layer by the parameter “where the embedding end is located (top of the layer) ”, if the basement roof is embedded layer, ie the embedding layer is the ground floor, Number of Layers: 0 if the base top is embedded. Structural design