应用油藏模拟预测油/气/水产量除需要其它一些资料外,还需要知道储层渗透率。标准的测井分析可确定孔隙度、含水饱和度和产层有效厚度(这些参数用于体积计算),然而却不能根据测井直接测定产能,储层渗透率通常由岩心资料和(或)压力瞬时测试分析确定。本文将着重论述把测井分析与岩心资料和压力测试分析结果综合之后,应用测井是如何确定渗透率的。 Applying Reservoir Simulation to Predict Oil / Gas / Water Production In addition to some additional information, it is important to know reservoir permeability. Standard log analysis determines porosity, water saturation, and effective production thickness (these parameters are used for volume calculations), but does not directly measure productivity based on logs. Reservoir permeability is typically measured by core data and / or pressure Instantaneous test analysis confirmed. This article will focus on how well logging determines how much permeability can be achieved after integrating log analysis with core data and stress test analysis results.