论文部分内容阅读
GB 50116-2013《火灾自动报警系统设计规范》相比GB 50116-98《火灾自动报警系统设计规范》在消防联动、系统设置、供电设置、布线设计等方面做出了改善,以下内容为新规范在布线设计方面与旧规范的不同之处,方便大家对GB 50116-2013与GB 50116-98之间做出清晰区分。11.1一般规定1、对铜芯绝缘导线或铜芯电缆电压等级的要求有变动,并增加新要求。
GB 50116-2013 “Fire Automatic Alarm System Design Code” compared to GB 50116-98 “Automatic Fire Alarm System Design Code” in the fire linkage, system settings, power supply settings, wiring design made improvements, the following is the new code In the wiring design and the old norms of the differences, to facilitate everyone on the GB 50116-2013 and GB 50116-98 to make a clear distinction between. 11.1 General Provisions 1. There is a change in the requirements of the voltage level of copper core insulated conductor or copper conductor cable and new requirements are added.