论文部分内容阅读
西安信号厂1990年发生9起工伤事故(其中3起重伤),负伤率2.57‰。其中重伤率0.856‰,超过国家二级企业0.2‰,的要求。回顾3起重伤事故发生的教训,对我们改变作风,加强安全工作和提高科学管理水平尤其重要。 1 事故发生的过程 1.1 9月5日11时20分,一名7级冲剪工,在63t冲床上进行触指整形序,当左手取出整形后的工件,右手向模腔里放工件时,冲床滑块下冲,造成中指2节和食指尖粉碎性骨折。 1.2 9月12日15时45分,一名6级冲剪工,在25t冲床上进行固定板变形序,右手用螺丝刀从模具上
In 2009, Xi’an Signal Factory suffered 9 work-related injuries (3 of them were seriously injured) and wounded 2.57 ‰. One seriously injured rate of 0.856 ‰, more than the national secondary business 0.2 ‰, the requirements. It is particularly important for us to review the lessons learned from the three serious injuries that have caused us to change our style, enhance safety and improve the scientific management. 1 The accident occurred 1.1 At 1120 on September 5, a 7 red punching workers in the 63t punch on the touch finger plastic order, when the plastic left after the removal of the workpiece, the right hand to put the workpiece into the cavity, Punch slider under the red, causing the middle finger 2 and the index finger tip comminuted fracture. 1.2 At 15:45 on September 12, a 6-level red scissors, 25t punch on the plate deformation order, the right hand with a screwdriver from the mold