论文部分内容阅读
电子产品生产中,防静电安全作业区的现场操作台,通常是由可以消除静电的工作台面和具有导电性的接地线及腕带所组成。在现场操作静电敏感的电子设备时,可以避免受到静电放电或静电力所引起的各种损害。这里讲的消静电工作台面是指在工作台的表面,盖上可以消除静电的保护垫。这种保护垫目前国内外均采用大约0.6×0.9m~2的导电胶板、导电塑料板或导电橡胶。由于它的面积小于操作台面积,工人在作业时,往往将静敏工件放置到非保护垫区城上,造成偶发性静电损害,更不能
In the production of electronic products, the anti-static safety work area of the scene console, usually by the static can eliminate the countertops and conductive ground wire and wristbands formed. When operating static-sensitive electronic equipment in the field, you can avoid any damage caused by electrostatic discharge or electrostatic force. Described here as anti-static countertops refers to the surface of the table, covered with a protective pad to eliminate static electricity. This protective pad at home and abroad are used about 0.6 × 0.9m ~ 2 conductive plastic sheet, conductive plastic sheet or conductive rubber. Because of its area is smaller than the console area, workers in the operation, often static sensitive workpiece placed on the non-protective pad city, causing occasional electrostatic damage, not to mention