Numerical study of PV/T-SAHP system

来源 :浙大学报(英文版)(A辑:应用物理和工程) | 被引量 : 0次 | 上传用户:pangjunli
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In order to utilize solar energy effectively and to achieve a higher electrical efficiency by limiting the operating temperature of the photovoltaic (PV) panel, a novel photovoltaic/thermal solar-assisted heat pump (PV/T-SAHP) system was proposed and constructed. The hybrid solar system generates electricity and thermal energy simultaneously. A distributed parameters model of the PV/T-SAHP system was developed and applied to analyze the system dynamic performance in terms of PV action, photothermal action and Rankine cycle processes. The simulation results indicated that the coefficient of performance (COP) of the proposed PV/T-SAHP can be much better than that of the conventional heat pump. Both PV-efficiency and photothermic efficiency have been improved considerably. The results also showed that the performance of this PV/T-SAHP system was strongly influenced by the evaporator area, tube pitch and tilt angle of the PV/T evaporator, which are the key factors in PV/T-SAHP system optimization and PV/T evaporator design.
其他文献
摘要:建筑业是一种危险性高、的行业容易发生安全事故的,文章通过对施工中所发生的安全事故原因进行分析,从技术及管理层面采取措施,确保施工生产按规章制度、操作规程严格进行,始终监控施工过程中安全状态,从而降低建筑安全事故的发生,提高建筑施工安全管理水平。  关键词:施工安全;控制;管理  Abstract: the construction is a high risk, industry prone
根据靖西(靖边-西安)天然气长输管道近期的用气现状和今后规划,预测了至2015年的调峰需求量.分析了陕西省天然气供应中存在的问题,认为应采取的季节调峰措施不仅应进行地下储
HSE管理体系推进工作开展以来,对提高固井作业安全环保管理水平起到了很好的作用,并取得了显著成绩.但是,在实际运行过程中仍然存在着一些对HSE概念认识不清、工作重点把握不
目的:研究胡椒碱自乳化释药系统的处方及其体外特性. 方法:通过溶解度、处方配伍试验以及伪三元相图的绘制来筛选处方,并考察空白处方、含药处方对自乳化效率的影响以及自乳
采用人工拼接的方式拼接了非洲马瘟病毒(AHSV)含有绝大多数线性抗原表位的VP7编码基因片段,克隆于pET-30a构建重组质粒pET-30a-VP7,将pET-30a-VP7转化BL21(DE3),经1.0 mmol/L
[目的]筛选30%烯唑·咪鲜胺悬浮剂防治稻曲病的最佳适期.[方法]分别于水稻剑叶露尖期、剑叶耳始见时、上两叶耳距2~3cm时、孕穗期、破口期、抽穗期、齐穗一扬花期按750 g/hm2
采用超音速火焰喷涂(HVOF)成形工艺喷涂球磨粉末,成功制备了纳米晶FeAl厚涂层(5 mm).分别利用SEM、图像分析、TEM以及Vickers硬度表征了该涂层的微观结构,并与用相同的喷涂参
This study investigates the magnetic mineralogy and paleointensity values of a collection of archaeological artifacts(pottery). The actual magnetic carriers and
This paper proposes a theoretical method using finite element analysis (FEA) to calculate the plastic collapse loads of pressure vessels under internal pressure
In the current studies a miniature silicon wafer fuel cell (FC) using L-ascorbic acid as fuel was developed, The cell employs L-ascorbic acid and air as reactan