我院药厂制剂室每次配制大型输液50万ml(合500ml 盐水瓶1000瓶),配液与灌封半天即可结束,但使用一台国产 W 82-86-64YXQGY 21600型卧式圆形高压蒸汽消毒器灭菌,每次仅能消毒200瓶,共需分5锅约花7～8小时才能消毒完。费时费工,劳动强度大,不安全,而且爆破与废品率也较高。在实践中我们深感必须改造设备,提高生产率。参考外地先进经验,我们设计了一种大型流通蒸汽消毒柜(如附图),每次可消毒1200瓶大型输液,经过三年实践,避免了爆瓶事故,提高了 Our hospital pharmaceutical preparation room each prepared large transfusion 500000 ml (together 500ml saline bottle 1000 bottles), with liquid and potting can be completed within a day, but the use of a domestic W 82-86-64YXQGY 21600 horizontal circular High-pressure steam sterilizer sterilization, disinfection can only be 200 bottles each time, a total of 5 pots required about 7 to 8 hours to disinfect finished. Time-consuming and laborious, labor-intensive, unsafe, and blasting and rejection rates are also higher. In practice, we deeply feel that we must reform our equipment to increase productivity. With reference to advanced experience in the field, we designed a large-scale steaming sterilizer (as the photo), which can sterilize 1,200 bottles of large-scale infusion at a time. After three years of practice, we avoided bottle explosion and increased