论文部分内容阅读
一、程序功能本程序用于pc-1500计算机。本程序用于计算调压井衬砌的内力和变位。考虑了下列荷载作用的情况: 1.内水压力; 2.外水压力; 3.岩石或填土的侧压力; 4.井壁围岩灌浆压力; 5.井壁温度均匀降低。本程序也可用于浅埋园形水池的结构分析。二、计算原理和程序编制说明调压井的结构主要可分为:①井壁:往往是埋设在基岩中的钢筋混凝土园筒;②底板:是一块放在弹性地基上的环形板。因此,调压井结构分析基本上可以看成是基础园筒和基础环形板的组合计算问题。本程序
First, the program features This program is used for pc-1500 computer. This procedure is used to calculate the internal force and displacement of the surge shaft lining. Consider the following loading conditions: 1. Internal water pressure; 2. External water pressure; 3. Side pressure of rock or fill; 4. Surrounding rock grouting pressure; 5. The borehole temperature decreases uniformly. This procedure can also be used for shallow garden-shaped pool structure analysis. Second, the calculation principles and procedures for the preparation of surge Well structure can be divided into: ① wall: often buried in the bedrock of reinforced concrete cylinder; ② floor: a piece of the elastic foundation on the ring plate. Therefore, surge tank structural analysis can basically be seen as a combination of the basic cylinder and the basic annular plate calculation. This procedure