论文部分内容阅读
结晶器的倒锥度是连铸机的一个重要参数,目前,国内对倒锥度的计算表示方法很不一致,极易造成误解,给工作带来不应有的损失和影响。而从国外引进的连铸机,又没见到关于结晶器倒锥度的计算表示方法的报道。为此,本文对此进行一些探讨。 一、结晶器的倒锥度 锥度通常是指圆锥形物体的大端和小端直径之差与两端之间轴向长度的比值,在工程上常用来表示物体圆锥面的倾斜程度,且习惯上都是将上小下大的圆锥形物体的锥度视为正锥度。
The taper of the mold is an important parameter of the continuous caster. At present, the calculation methods of the reverse taper in China are very inconsistent, which can easily cause misunderstanding and bring undue losses and impacts to the work. The continuous casting machine imported from abroad, but also did not see on the mold taper calculation method of reporting. To this end, this article to explore some of this. First, the mold taper taper taper generally refers to the large end and small end diameter of the difference between the length of the axial length between the two ends, commonly used in engineering to indicate the degree of tilt of the object conical surface, and customary The taper of a conical object that is large and small is regarded as a positive taper.