论文部分内容阅读
最近,我们走访了5家县及县以上医院,了解医疗设备的使用情况,总的看,一些单位医疗设备带“病”工作的多,闲置、报废的多,医疗设备管理比较混乱。通过对3家医院的调查,综合情况是: 1992年设备的人为故障占总故障的60％以上。因人为故障造成不能检修而闲置或报废的设备,县医院在10万元以上,地区医院在25万元以上,省医院在40万元以上。经济损失是严重的。按造成故意的外因分类,有如下3种: 1.不懂装懂。如一台美国进口ADR400型B超,因出现显示图象不稳,操作者自以为懂点电子技术,就确定是探头内部接触不好(且不说判断有误)。在其拆卸探头的过程中,因不明白内部的结构,旋卸端盖时,没有将盖上的插座往里推出定位槽,结果是插座随端
Recently, we visited five hospitals at or above the county level to understand the use of medical equipment. In general, some units have a lot of medical equipment with “disease” work, and they are idle and scrapped, and medical equipment management is confusing. Through the investigation of three hospitals, the overall situation is: In 1992, the artificial failure of equipment accounted for more than 60% of the total failure. Due to human failure, equipment that can’t be overhauled and idled or scrapped, county hospitals are more than 100,000 yuan, regional hospitals are more than 250,000 yuan, and provincial hospitals are more than 400,000 yuan. The economic loss is serious. According to the cause of intentional external cause classification, there are the following three kinds: 1. Do not understand to understand. If a U.S. imported ADR400 B-type camera is not stable because of the appearance of the display image, the operator assumes that he knows the point of the electronic technology and determines that the internal contact of the probe is not good (and that there is no mistake in judgment). In the process of disassembling the probe, because the internal structure is not understood, when the end cap is unloaded, the socket on the cover is not pushed out into the positioning groove, and the result is that the socket is connected with the terminal.