论文部分内容阅读
1、原文图1中滑行钢练绳与人行道三角架乍看起来似乎有矛盾(图的比例尺过大,将钢絲绳画至挡碴牆上了),但实际使用时系将滑行钢絲绳置于人行道三角架之下,因此并无矛盾。 2、检查架系紧贴于墩台顶帽前组装的,因此可在梁跨全长范围內(包括支坐)进行检查。检查者可从墩台顶帽处上坐板,组装坐板不受墩高及水深影响。其组装程序如下(拆除坐板系按组装程序的相反步骤进行); (1)每侧钢练绳穿上一门滑车后,即将钢练绳固定好。(2)
1, the original picture 1 skating steel practice rope and sidewalk tripod at first glance seems to be contradictory (the scale of the figure is too large, the wire rope painted to the ballast stop wall), but the actual use of the Department will be sliding rope Placed under the sidewalk tripod, so there is no contradiction. 2, check the rack close to the top of the piers assembly tower, it can cross the full length of the beam (including support) inspection. Inspector from pier top hat at the sitting board, assembly board from pier height and water depth. The assembly process is as follows (remove the boarding system according to the assembly process of the opposite steps); (1) on each side of the steel rope put on a tackle, the steel rope training will be fixed. (2)