论文部分内容阅读
With the development of the manufacturing technology, electron beam welding(EBW) is capable of producing titanium alloy large parts in aero fields. To increase the applications and improve the properties, EBW with beam oscillation was investigated on TC4-DT alloy with50 mm thickness. We detected the welding samples by X-ray NDT, observed the microstructures of the welds, and tested the fatigue properties of the joints. The results showed that EBW with beam oscillation improved the weld morphology as well as welding quality, and the microstructure homogeneity of the welds and HAZ along the weld penetration were also improved. The fatigue properties of the joints with beam oscillation were more excellent than those of conventional EBW, even equal to those of the base metal under high stresses. The influences of the processing and the microstructure on the properties with beam oscillation were discussed.
With the development of the manufacturing technology, electron beam welding (EBW) is capable of producing titanium alloy large parts in aero fields. We detected the welding samples by X-ray NDT, observed the microstructures of the welds, and tested the fatigue properties of the joints. The results showed that EBW with beam oscillation improved the weld morphology as well as welding quality, and the microstructure homogeneity of the welds and HAZ along the weld penetration were also improved. The fatigue of of joints with beam oscillation were more excellent than those of conventional EBW, even equal to those of the base metal under high stresses. The influences of the processing and the microstructure on the properties with beam oscillation were discussed.