The joint interface between semi-solid Zn-Al filler metal and SiCp/Al composites with applying vibration for different time was examined. With increasing vibrating time, the oxide layer was disrupted prior at the centre to the periphery of the interface. And the solid grains near the centre of interface in semi-solid filler metal aggregated into two solid regions and compressed the composites during vibration; the solid grains near the periphery of interface moved toward the edge and scraped the composites during vibration. The models of disrupting oxide layer under the vibration condition were developed. At the centre of interface, the oxide layer was tore and stripped during the solid grains in the semi-solid filler metal depressing the composites with a very high compressive stress. At the periphery of interface, the oxide layer was cut and stripped into the filler metal during the solid grains scraping the interface. The joint interface between semi-solid Zn-Al filler metal and SiCp / Al composites with applying vibration for different time was examined. With increasing steprating, the oxide layer was disrupted prior at the center to the periphery of the interface. And the solid grains near the center of interface in semi-solid filler metal aggregate into two solid regions and compressed the composites during vibration; the solid grains near the periphery of interface moved toward the edge and scraped the composites during vibration. The models of disrupting oxide layer under the vibration condition were developed. At the center of interface, the oxide layer was tore and stripped during the solid grains in the semi-solid filler metal depressing the composites with a very high compressive stress. At the periphery of interface, the oxide layer was cut and stripped into the filler metal during the solid grains scraping the interface.