我厂在北配分厂自建宿舍楼时,对内墙圈梁施工采用了槽钢模板,取得了很好的经济效果。一、施工方法1.两侧槽钢用φ14螺栓与2～3块担子板(视槽钢长度而定,一般担子板间距以不超过3米为宜)联成整体。2.内墙砌至离圈梁底皮二层砖时,吊上钢模,在担子板下放一立砖(也可用硬 When the factory built a dormitory building in the North Distribution Plant, it adopted a channel steel template for the construction of the inner wall ring beam, and achieved a very good economic effect. First, the construction method 1. Both sides of the channel with φ14 bolts and 2 to 3 pieces of the child board (depending on the length of the channel steel, the general burden of board spacing is not more than 3 meters is appropriate) into a whole. 2. When the inner wall is laid to the second floor of the ring beam, lift the steel mold and place a vertical brick under the load plate (it can also be hard