【摘 要】
：
One kind of novel reactive thermotropic liquid crystalline polymer-methacryloyl copolymer (LCMC) containing polyester mesogenic units was synthesized. Its struc
【机 构】
：
Department of Material and Chemical Engineering,Key Laboratory of Nonferrous Materials and New Proce
论文部分内容阅读
One kind of novel reactive thermotropic liquid crystalline polymer-methacryloyl copolymer (LCMC) containing polyester mesogenic units was synthesized. Its structure,morphology and properties were investigated systemically by Ubbelohde viscometer,differential scanning calorimetry (DSC),Fourier transform infrared spectroscopy (FTIR),wide-angle X-ray diffractometry (WAXD) and polarizing optical microscopy (POM). The results indicate that it is one kind of nematic thermotropic liquid crystal polymer (TLCP). The impact strength,bending strength and the morphologies of impact fracture surface of LCMC,unsaturated polyester (UP) and glass fiber (GF) in-situ hybrid composites were studied by Izod impact tester,universal testing machine and scanning electron microscopy (SEM),respectively. The results show that the impact and bending strength of composites containing LCMC are improved,especially the composites containing 5% LCMC increases most obviously. These results with SEM results reveal that LCMC plays an important role in the improvement of interfacial adhesive between matrix and fiber.
其他文献
A new all-zero block determination rule was used to reduce the complexity of the AVS-M encoder. It reuses the sum of absolute difference of 4×4 block obtained
YbAl3(BO3)4 crystal of good optical quality was grown by the flux method. The structure of YbAl3(BO3)4 crystal was determined by single-crystal X-ray diffractio
Based on analysis of three alloys with various Re contents, the effects of Re on the interfacial structure characteristic and interfacial dislocations of γ/γ
Two comparative models taking into account of momentum,energy and mass transport coupled with chemical reaction kinetics were proposed to simulate gas transport
Zinc aluminosilicnte glasses containing Li2 O, ZnO , Al2 O3 and SiO2 were prepared by conventional melting and quenching technique, and subsequently converted t
Age hardening characteristic and tensile property of Mg-3.5Dy-4.0Gd-3.1Nd-0.4Zr alloy were investigated. The alloy exhibits a considerable age hardening effect
In functionally graded materials (FGM), the problem of interface stability caused by the volume deformation is commonly regarded as the key factor for its perfo
The annealed microstructures of the rolled AZ31 alloy sheets were examined by using light optical microscopy. The mechanical properties were measured by tensile
The magnetization, magnetostriction and compressive strengths of arc-cast polycrystalline and directionally solidified Tb0.36Dy0.64(Fe1-xMnx)1.9 (x=0, 0.05, 0.1
Besides the two phase transitions known in ferroelectromagnets, an additional transition was observed experimentally in Pb(Fe1/2Nb1/2)O3 and the possible mechan