聚羧酸高性能减水剂的常温合成研究及应用

来源 :商品混凝土 | 被引量 : 0次 | 上传用户:daoshi100
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
在常温20℃~40℃条件下,采用过硫酸铵(APS)—抗坏血酸(Vc)氧化还原体系,以异戊烯醇聚氧乙烯醚(TPEG)、丙烯酸(AA)为单体,在链转移剂的作用下,合成了一种聚羧酸高性能减水剂(Kami 313C)。研究结果表明,常温合成的聚羧酸高性能减水剂(Kami 313C)减水率高达34.1%。与60℃条件下合成的聚羧酸高性能减水剂(Kami 313)性能相比,本合成工艺无需加热,无需去离子水,采用普通自来水,节约能源,降低生产成本,性价比更高。 Under the condition of room temperature 20 ℃ ~ 40 ℃, ammonium persulfate (APS) -corbic acid (Vc) redox system was used, and the monomers of isoprenol polyoxyethylene ether (TPEG) and acrylic acid Agent, a polycarboxylate superplasticizer (Kami 313C) was synthesized. The results show that the water-reducing rate of polycarboxylate superplasticizer (Kami 313C) synthesized at room temperature is as high as 34.1%. Compared with the performance of Kami 313 synthesized at 60 ℃, this synthetic process does not need heating, does not need deionized water, uses ordinary tap water, saves energy, reduces production cost, and is more cost-effective.
其他文献
核心提示:未来中国,大型央企、大型民营企业及类BAT企业,最有机会入围“千亿美元市值俱乐部”。  当阿里巴巴超越中国移动和中国石油,成为中国最具身价的上市企业时,市场中对下一个跻身千亿美元市值中国企业的猜测不绝于耳。互联网、移动互联网浪潮所主导的信息时代,每一个行业都可能出现新的“黑马”。  不过,长期深耕于企业市值研究的广东省生产力学会副会长韩和元认为,阿里巴巴的脱颖而出,并非完全是特定时代下的