论文部分内容阅读
1全新帕萨特轿车喷油器清洗后的基本设定方法全新帕萨特轿车采用TSI缸内直喷技术发动机,清洗过喷油器后必须要做基本设定。方法为:起动发动机,运转至正常工作温度,用故障检测仪进01(发动机控制单元)→04(基本设定)→200(通道号)→确定→根据提示同时把加速踏板和制动踏板踩到底并保持,等到数据块1区由数字变到0,基本设定完成。全过程大约10 min。
A new Passat sedan car injector after cleaning the basic setting method The new Passat sedan using TSI direct injection engine technology, after cleaning the injector must do the basic settings. The method is: start the engine, run to normal operating temperature, with fault detector into 01 (engine control unit) → 04 (basic setting) → 200 (channel number) → OK → according to the prompt of both the accelerator pedal and the brake pedal In the end and maintained until the data block 1 area from the figure to 0, the basic set to complete. The whole process is about 10 min.