Lotus、Cars厂最近安装了一台卧式加工中心(图1),其上带有一个有六个托板的刀库。该中心能在三小时内加工一台发动机上的主要壳体铸件。因为采用了多托板结构,生产率得到了显著提高。还因为每个托 Lotus, Cars recently installed a horizontal machining center (Figure 1) with a magazine with six pallets. The center can process the castings of one of the main engine housings in three hours. Thanks to the multi-plate construction, productivity has been significantly increased. Also because of each care