新型微生物发泡剂的复配研究

来源 :建材绿色制造先进技术国际交流会 | 被引量 : 0次 | 上传用户：InsideASPNET

【摘要】

：

以微生物发泡剂为基础发泡剂,添加三种不同发泡剂与微生物发泡剂进行复配研究,以提高微生物发泡剂的性能.结果表明:(1)采用0.7％的聚乙二醇400与微生物发泡剂复掺,所制得泡沫的稳定性较好,但是产泡能力相较于其他两种发泡剂较差.(2)采用0.5％的十六烷基三甲基溴化铵与微生物发泡剂复掺,其产泡量最好,但是稳定性较差.(3)采用0.1％的十二烷基磺酸钠与微生物发泡剂复掺,所制得的泡沫稳定性好而且产泡量

【作者】

：

张静荣辉

【机构】

：

天津城建大学材料科学与工程学院,天津300384

【出处】

：

建材绿色制造先进技术国际交流会

【发表日期】

：

2018年9期

【关键词】

：

泡沫混凝土微生物发泡剂复配体系聚乙二醇十六烷基三甲基溴化铵十二烷基磺酸钠稳定性产泡量

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

Comparative Study of MoSi2-Borosilicate Glass Coatings on Fibrous Ceramics Prepared by In-situ React

Two infrared radiating coatings with borosilicate glass as binder and MoSi2 as emittance agent were prepared on mullite fibrous ceramics by an in-situ reaction method and a two-step method,respectivel

会议

Coating materialsSinteringOxidationMechanical propertiesRadiation effects

正交设计在预分解窑用矿化剂性能评价中的应用

高强度熟料是每个水泥生产企业的内在需求.但与之匹配的高率值生料,易烧性过差,影响工艺操作,难以稳定煅烧连续生产.合理使用矿化剂改善易烧性,减轻窑烧成负荷可为预分解窑系统生产高强度熟料开辟新途径.本文研究了适合预分解窑系统的矿化剂,原料全部来自工业废渣和尾矿.建立了以易烧性系数和矿化系数双参数的等级划分,并以此评价矿化剂效果.采用正交试验法对矿化剂因素水平进行了研究,找到了复合矿化剂的最优组合.即带

会议

水泥熟料矿化剂易烧性矿化系数正交设计

Self-healing behavior in MoSi2/borosilicate glass composite

The self-healing behavior of MoSi2/borosilicate glass composite was investigated by comparing the flexure strength of pre-scratched specimens before and after healingtreatment.The post-healing strengt

会议

Self-healingMoSi2Borosilicate glassOxidation

高能效低氮预热预分解系统及先进烧成技术研发应用

研发了以六级预热器、低氮分解炉、两档短窑、中置辊破冷却机为典型代表的烧成技术,集成应用在水泥窑烧成系统上,达到了低能耗的技术指标,可比熟料热耗≤640kcal/kg.cl,可比标煤耗≤91.4kgce/t.cl,自脱硝效率≥50％,与能耗限额标准新建企业的准入值相比节煤率10％以上,在河南孟电、印尼BOSWA、沙特UCIC等多个项目中成功应用,节能减排效果显著,实现了有竞争力的先进烧成技术推广应用

会议

水泥窑烧成技术预热器低氮分解炉短回转窑冷却机耐火材料

Enhanced plasticity by deformation-induced nanocrysallization in bulk amorphous Al2O3-ZrO2-Y2O3

Deformation of bulk amorphous Al2O3-ZrO2 with different ratios of A/Z was investigated under compression at 500℃.A20Z and A40Z exhibited brittle fracture and remained amorphous after compression;howev

会议

Amorphous oxidesPlasticityShear bandsDuctile transformation temperatureCryst

Bonding strength and thermal shock resistance of glass coatings on anisotropic mullite fibrous ceram

Mullite fibrous ceramics with a two-dimensional planar random structure was prepared via a pressure infiltration method.The in-plane and out-of-plane mechanical properties,thermal expansion coefficien

会议

Coating materialsInorganic materialsAnisotropyMechanical propertiesSurface a

Electrospun mullite nanofibers derived from diphasic mullite sol

Fine grained mullite nanofibers derived from the diphasic mullite sol were successfully fabricated by electrospinning and subsequent pyrolysis at 1500oC.Polymethylsiloxane and aluminum tri-sec-butoxid

会议

MulliteElectrospinningFibersMicrostructureSol

Nanograined Al2O3-ZrO2(Y2O3)ceramics through pressureless sintering of powders with different degree

In this work,Al2O3-ZrO2(Y2O3)nanoceramics were prepared via pressureless sintering of powders with different degrees of crystallinity.It was demonstrated that,the crystallization of amorphous phase in

会议

pressureless sinteringAl2O3-ZrO2crystallinitynanoceramics

Preparation of magnesium silicate/carbon composite for adsorption of rhodamine B

Magnesium silicate/carbon composite was prepared by simple hydrothermal method using sodium silicate,magnesium sulfate,glucose and sodium acetate as raw materials.The composite was characterized using

会议

Phase transformation and morphology evolution of sepiolite nanofibers during thermal treatment

In this study,the phase transformation and micromorphology evolution of sepiolite nanofibers were studied along with the increase of temperature from 300 to 1300oC,using natural sepiolite samples as r

会议

SepiolitePhase transformationMorphology evolutionThermal treatmentNanofibers

新型微生物发泡剂的复配研究

其他学术论文