论文部分内容阅读
利用波形齿锚具实现横向张拉CFRP片材的体外预应力加固技术,对4根完全相同的7 m跨度的T型梁进行加固(梁侧加固3根梁,其中1根梁考虑二次受力影响;梁底加固1根梁);利用普通粘贴CFRP的加固技术对另一根梁进行加固(加固前与前4根梁完全相同);然后对加固后的5根梁进行试验研究。结果表明:梁侧或梁底CFRP片材体外预应力加固能同时显著提高混凝土梁的开裂荷载、屈服荷载、极限承载力以及截面刚度,能有效限制混凝土裂缝宽度的发展,也能充分发挥CFRP片材高强性能,同时加固时有无初始荷载即二次受力对加固后的梁在承载力及变形能力方面均无明显影响。
The use of corrugated tooth anchors to realize the external prestress reinforcement of transversely tensioned CFRP sheets is used to reinforce four identical T-beams with a span of 7 m (three beams are reinforced on the beam side, of which one is considered as secondary Force to reinforce one beam at the bottom of the beam). The reinforcement of the other beam is reinforced by the ordinary CFRP reinforcement technique (before the reinforcement is identical to the first four beams). Then, the five strengthened beams are tested. The results show that the prestressed reinforcement of CFRP sheet on the beam side or the beam bottom can significantly increase the cracking load, yield load, ultimate bearing capacity and section stiffness of concrete beam at the same time, which can effectively limit the development of concrete crack width and give full play to the advantages of CFRP sheet Material high-strength performance, at the same time with or without reinforcement of the initial load that the second force of the beam after the reinforcement in the bearing capacity and deformation capacity have no significant impact.