论文部分内容阅读
A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed.A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1 st-order compensated bandgap.To reduce the offset of the amplifier and noise of the bandgap reference,input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current,these MOSFETs all work in weak inversion.The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network.The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO).The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process,and the temperature coefficient (TC) was measured to be only 2.1 × 10-6/℃ over the temperature range of-40-125 ℃ after trimming.The power supply rejection (PSR) was - 100 dB@ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.