论文部分内容阅读
流变是岩体的固有力学性质,对地下厂房开挖和运行的安全稳定性具有重大影响。但岩壁吊车梁设计时多采用仅考虑岩壁吊车梁自身所受荷载的刚体极限平衡法,忽略了围岩变形尤其是岩体流变变形的影响。因此,结合某水电站地下厂房工程,建立地下厂房系统有限元模型,基于岩体Drucker-Prager弹塑性本构关系和考虑时间硬化的等效流变原理,研究了地下厂房开挖过程和正常运行10年后岩体流变对岩壁吊车梁锚杆应力的影响。结果表明,在地下厂房正常运行10年后下游顶部第一排受拉锚杆在长度6.72 m处应力值达317.83 MPa,随着地下厂房运行时间的延长,岩壁吊车梁锚杆应力值逐渐变大,但应力变化速率逐渐减小,有必要采取工程措施,以便防止随着时间的延长岩体流变量逐渐增长,从而使岩壁吊车梁锚杆发生屈服。
Rheology is the inherent mechanical property of rock mass, which has a significant impact on the safety and stability of excavation and operation of underground powerhouse. However, the rigid-body limit equilibrium method considering only the load on the rock-walled crane beam is mostly used in the design of the rock-walled crane beam, and the influence of rock deformation, especially rheological deformation, is ignored. Therefore, the finite element model of underground powerhouse system is established based on the underground powerhouse project of a hydropower station. Based on the Drucker-Prager elastic-plastic constitutive relation of rock mass and the equivalent rheological principle of considering time hardening, the excavation process and normal operation of underground powerhouse are studied. Influence of rock mass rheology on rock bolt stress of crane beam in. The results show that the stress value of anchor bolt in the first row at the top of downstream reaches 317.83 MPa at a length of 6.72 m after 10 years of normal operation of underground powerhouse. With the extension of underground plant operation time, Large, but the rate of stress change gradually decreases. It is necessary to take engineering measures to prevent gradual increase of rock mass flow variables with the extension of time, so as to yield the rock bolt of crane beam.