论文部分内容阅读
本文只着重夹杂之总量之测定,关于个别夹杂物之测定方法,以及其他电解法之详细情况,我院正在进行研究。快速电解方法,已在本文中加以借述,除电流加大、注意保持温度不超过30—35℃之外,其他操作完全相同。但应指出此法只限于测定稳定夹杂物,而不稳定夹杂如FeS、Mno、MnS等之测定,必须采用其他方法。我院炼钢及电冶金实验室目前正在进行关于夹杂物之测定工作。我们建议各厂采用此法,并欢迎和我们联系,需要我们时,将尽全力协助。
This article focuses only on the determination of the total amount of inclusions, on the determination of individual inclusions, and other details of the electrolysis method, our hospital is under study. Rapid electrolysis method, has been in this article to borrow, in addition to increased current, pay attention to keep the temperature does not exceed 30-35 ℃, the other operations are exactly the same. However, it should be noted that this method is limited to the determination of stable inclusions, and the determination of unstable inclusions such as FeS, MnO, MnS and the like must be performed by other methods. Our hospital steelmaking and electric metallurgical laboratory is currently on the determination of inclusions. We suggest that the factories use this method and are welcome to contact us. We will do our best to help you when we need us.