论文部分内容阅读
通过所施加的电荷密度分布的静电力,使热塑膜在瞬间加热时形变成为一种浮雕物。它可经过较强的加热脉冲而重新变平。文章指出,热塑膜可用来作为电子图象的快速、可擦除的存储器,它能够及时地制成光学衍射图。为达到照相干板的灵敏度,图象电流密度用一电路倍增板增强。文中谈到热塑转换器几项特性测量,并据其他人的研究结果进行了讨论。非晶形炭膜粒化的“实时”衍射图,可由10~(-10)c/cm~2以下的电荷密度而获得。定量的图象选择,由于非线性特性曲线及其他一些仍须详细研究的干扰而受到影响。
Due to the electrostatic force distributed by the applied charge density, the thermoplastic film deforms into a relief upon instantaneous heating. It can be flattened again by strong heat pulse. The article states that the thermoplastic film can be used as a fast, erasable memory for electronic images, which can be made in time to produce optical diffraction patterns. To achieve the sensitivity of a photographic plate, the image current density is enhanced with a circuit doubler. The article talked about several characteristics of the thermoplastic converter measurements, and other people’s research results were discussed. The “real time” diffraction pattern of the amorphous carbon film granulation can be obtained from the charge density of 10 ~ (-10) c / cm ~ 2 or less. Quantitative image selection is affected by non-linear characteristic curves and other disturbances that still need to be studied in detail.