通过对02B热室进行的现场调试以及溶解系统水试过程中发现的问题,经过与核电工程公司设计院、核燃料后处理放化实验设施工程部、核燃料后处理放化实验设施运行部等单位讨论,针对02B热室出现的设备布置空间拥挤、一些阀门和快接头的操作用机械手无法完成,以及台架尺寸偏大、采用台架转运箱转运困难等问题,对热室内已安装的台架进行了以下整改。 Through the on-site commissioning of 02B hot chamber and the problems found during the water dissolution test of the dissolving system, it was discussed with such units as Design Institute of Nuclear Power Engineering Company, Engineering Department of Nuclear Fuel Post-treatment and Radiation Experimental Facilities, Operation Department of Nuclear Fuel Post-treatment and Radiation Experimental Facilities In view of the equipment crowded space in the 02B hot chamber, the operation of some valves and quick couplers can not be completed by manipulators and the size of the gantry is too large, the transportation by the gantry crane is difficult, and the gantry installed in the hot chamber is subjected to The following rectification.