论文部分内容阅读
上海机械1964年7期祝长有同志所写“机床用塞铁的修复法”一文,的确是一种較可靠,而可节約材料,减少人力的办法,是目前机床修理时广泛采用的。为进一步的提高修理质量、节約金属材料和降低劳动强度,特再介紹一种更有效的胶合修复法。新型的金属胶合工艺,近几年来在应用范圍上有很大的提高和扩大,本刊1963年、1964年会有較多篇幅詳載,現在介紹的是采用机械或电气层压板,以环氧树脂胶作粘合剂与金属塞铁表面粘合。簡单的工艺过程如下:(1)将旧塞鉄磨損的表面用細銼刀銼平,光洁度为▽▽5,平放塞铁并将胶合向上,用酒精、丙酮彻底洗滌使絕对无油污,再用丙酮洗滌过的φ0.2×20毫米細銅絲逐根平行地排列放在塞铁胶合面上(細銅絲长度視塞鉄寬度而定,排列間隔約
Shanghai Machinery 1964 7 wish to have comrades commented that “the repair of machine tool plug iron” article is indeed a more reliable, and can save material and reduce manpower approach is currently widely used machine repair. In order to further improve the quality of repair, save metal materials and reduce labor intensity, introduced a more effective glue repair method. New metal bonding process, in recent years in the scope of application has greatly improved and expanded, 1963, 1964, there will be more space in more detail, is now introduced is the use of mechanical or electrical laminate to epoxy Resin glue as a binder and metal plug surface. Simple process is as follows: (1) the old plug 鉄 wear the surface with a fine file rasp, smooth finish ▽ ▽ 5, lay the ferrule and glued upward, thoroughly washed with alcohol, acetone absolutely no oil, Then acetone washed φ0.2 × 20 mm thin copper wire by the parallel arrangement of the plug on the surface of the plug (thin copper wire length depending on the width of the stopper,, arranged at intervals of about