热处理时间对氧化钒薄膜相变性能的影响

来源 :半导体光电 | 被引量 : 0次 | 上传用户:asd710601
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
采用直流磁控溅射的方法在普通玻璃上制备了低价的氧化钒薄膜,在氧气和氩气混合气氛中,对所制备的薄膜进行不同时间的热处理,得到具有相变特性的VO2薄膜。分别利用X射线衍射(XRD)和场发射扫描电镜(SEM)分析了薄膜的组分、结晶结构和表面形貌,利用四探针法测试了薄膜的电阻。结果表明:热处理前的氧化钒薄膜主要成分为V2O3,经过热氧化处理后,低价的氧化钒被氧化,薄膜中VO2含量增加,薄膜发生金属-半导体相变,其中450℃、2h为最佳处理参数,其电阻相变幅度超过2个数量级,薄膜的相变温度仅为30℃。 A low-cost vanadium oxide film was prepared on ordinary glass by direct-current magnetron sputtering. The films were heat-treated at different times in a mixed atmosphere of oxygen and argon to obtain a VO2 thin film with phase transition characteristics. The composition, crystal structure and surface morphology of the films were characterized by X-ray diffraction (XRD) and field emission scanning electron microscope (SEM) respectively. The resistance of the films was measured by four-probe method. The results show that the main component of the vanadium oxide film before heat treatment is V2O3. After the thermal oxidation, the vanadium oxide is oxidized at a low price, and the VO2 content in the film increases. The metal-semiconductor phase transition occurs at 450 ℃ and 2h Processing parameters, the resistance phase change more than two orders of magnitude, the phase transition temperature of the film is only 30 ℃.
其他文献
刚到报社工作时,我领导非常瞧不上我,他不止一次抱怨:来了一个花瓶。  我领导很牛,做记者时曾经一个月30天里15天的头条都是他的稿子,后来分管广告运营,月度营业额成倍地增长,这样一个实力派觉得我花拳绣腿很正常。  他向我交待工作,我拿着本儿认真地记,他眼睛却扫到我办公桌:一瓶evian喷雾、一个补色提亮的指甲油、一面非常精致的化妆镜、一小瓶鲜花、一把骨瓷壶和茶杯,还有一个雅致瓷器的天使。  他脸上
针对HJ 2.4—2009《环境影响评价技术导则声环境》中面声源的几何发散衰减计算存在的问题,提出采用工程法计算a×b面声源噪声几何发散衰减方法,并通过实例分析进行比较论证。