Aeroacoustic pressure oscillation is one of the important challenges in segmented solid rocket motors with high slendess ratio. The reason for these oscillations can be searched in vor-tex shedding due to grain bing surfaces, holes and slots. In this paper, a novel sub-scaled motor was used for evaluation of aeroacoustic pressure oscillations. First, the related parameters to scale down using Buckingham’s Pi-theorem were determined and then the sub-scaled motor was designed and manufactured. After this, Strouhal number in various grain forms and vortex shedding predic-tion criteria have been discussed. Then, one-dimensional linear and non-linear solution approaches have been presented. To understand the motor intal flow and vortex shedding formation, steady state computational fluid dynamic performed for seven regression steps and finally, two static tests have been performed. Results show that various definitions for Strouhal number are useful only for primarily glance on vortex shedding and pressure oscillations and so CFD solution and the test pro-gram are inevitable for a correct understanding of the ballistic operational condition of the motor. Experimental results demonstrated the existence of such oscillations with frequencies nearly equal to axial modes. It seems that non-linear parameters have small effects on aeroacoustic pressure oscillation and therefore the linear solution is acceptable to obtain approximate data. Of course, it should be emphasized that linear solution represents oscillations on overall motor action time, whereas the output of non-linear solution depends on thermochemistry properties of solid propel-lant and combustion products. Therefore, with a non-linear solution, oscillations maybe occur in some intervals of action time. FFT (Fast Fourier Transformation) results demonstrated that although both first and second acoustic modes have been excited, the position of longitudinal oscil-lation has an important role on which one is dominant.