一、发动机(S195柴油机)的间隙调整 1.供油提前角供油提前角要求为16～20°。调整方法:松开高压油泵上的高压油管接头螺母;将油门手柄放至供油位置,按正常运转方向轻轻转动曲轴,当油泵顶端高压油管接头口刚冒出柴油时,观察飞轮刻线是否对准了水箱上的箭头。如果箭头没指在规定范围内,则需调整。一般以增减调整垫 First, the engine (S195 diesel engine) clearance adjustment 1. Supply advance advance angle oil advance angle requirements for 16 ~ 20 °. Adjustment method: release the high-pressure pump on the high-pressure hose connector nut; the throttle handle to the fuel supply position, rotate the crankshaft gently in the normal direction of operation, when the top of the pump high-pressure fuel pipe connector just emerge diesel, observe whether the engraved flywheel Align the arrow on the tank. If the arrow does not refer to the provisions of the range, you need to adjust. General increase or decrease adjustment pad