阿拉斯加北部斜坡有几千口油井,其中大部分为水平井,采用水力压裂技术增产或自然裂缝生产。支撑剂回返及油层细小颗粒会造成油井堵塞,严重影响油井生产。对于大部分出砂井来说,通常使用连续油管清除办法,即使用氮气举升清洗液并悬浮支撑剂将其带到地面。但是由于有些井压力太低,造成大量的氮气消耗,使得该方法无论在技术上还是经济上都不可行。本文介绍了一种新的井段清理方法,它使用带有井下真空工具的同心连续油管清除填充物和支撑剂。新技术在阿拉斯加北部斜坡的应用取得了令人满意的结果 There are thousands of wells on the northern slopes of Alaska, most of which are horizontal wells that use hydraulic fracturing to increase production or produce natural fractures. The proppant return and fine particles of the oil layer can cause the oil well to block up, seriously affecting the well production. For most sand production wells, a coiled tubing cutout is commonly used, where nitrogen is used to lift the cleaning solution and suspend the proppant to bring it to the surface. However, this method is not technically or economically viable due to the low pressure in some wells, resulting in significant nitrogen consumption. This article describes a new method of well section cleaning that uses a concentric coiled tubing with a downhole vacuum to clear the packing and proppant. The application of new technology to the northern slope of Alaska has yielded satisfactory results