现代工业建筑敷设有各种公用管网,这些管网大部分是通过预埋件固定在柱子上的,墙板和隔墙也都是采用这种方法连接固定的。在柱的标准设计图纸中,通常没有考虑设置上述用途的预埋件,因此,在具体项目的设计中,必须对标准设计的柱子补充安排各种预埋件,结果加长了设计周期。为了加快设计进度,常常对建筑物全部柱子的四个侧面埋置角钢,以保证公用管道可以固定在柱子的任何位置上。但是,采用这种方法,钢材耗用量过大。 Modern industrial buildings are equipped with a variety of common pipe networks. Most of these pipe networks are fixed on pillars through embedded parts. The wall panels and partition walls are also connected and fixed in this way. In the standard design drawing of the column, the embedded part with the above purpose is usually not considered. Therefore, in the design of the specific project, various embedded parts must be added to the standard designed column, and the result is a longer design cycle. In order to speed up the design process, angles are often embedded on all four sides of the building’s columns to ensure that the utility pipes can be fixed at any position on the columns. However, with this method, steel consumption is excessive.