【摘 要】
：
Tension stress in steel-concrete composite is widely observed in engineering design.Based on an experimental program on tension performance of three square concrete-filled tubes (SCFT),the tension theory of SCFT is proposed using a mechanics-based approac
【机 构】
：
Central Research Institute of Building and Construction Co.,Ltd.,MCC,Beijing 100088,China;Department
论文部分内容阅读
Tension stress in steel-concrete composite is widely observed in engineering design.Based on an experimental program on tension performance of three square concrete-filled tubes (SCFT),the tension theory of SCFT is proposed using a mechanics-based approach.The tension stiffening effect,the confining strengthening effect and the confining stiffening effect,observed in tests of SCFTs are included in the developed tension theory model.Subsequently,simplified constitutive models of steel and concrete are proposed for the axial tension performance of SCFT.Based on the MSC.MARC software,a special fiber beam-column element is proposed to include the confining effect of SCFTs under tension and verified.The proposed analytical theory,effective formulas,and equivalent constitutive laws are extensively verified against three available tests reported in the literature on both global level (e.g.,load-displacement curves) and strain level.The experimental verification proves the accuracy of the proposed theory and formulations in simulating the performance of SCFT members under tension with the capability to accurately predict the tensile strength and stiffness enhancements and realistically simulate the fractal cracking phenomenon.
其他文献
An efficient and meshfiree approach is proposed for the bending analysis of thin plates.The approach is based on the choice of a set of interior points,for each of which a basis function can be defined.Plate deflection is then approximated as the linear c
High viscosity asphalt (HVA) has been a great success as a drainage pavement material.However,the larger porosity of drainage asphalt mixtures weakens the cohesion and adhesion and leads to premature rutting,water damage,spalling and cracking.The purpose
In this study,bituminous binder was modified with Cocamide Diethanolamide chemical,a non-ionic surfactant,and the physical and rheological properties of modified binders were investigated.In addition,Cocamide Diethanolamide has been used for the first tim
Acoustic emission and digital image correlation were used to study the spatiotemporal evolution characteristics of crack extension of soft and hard composite laminated rock masses (SHCLRM) containing double fissures under uniaxial compression.The effects
Noncorrosive reinforcement materials facilitate producing structural concrete with seawater and sea sand.This study investigated the properties of seawater and sea sand concrete (SSC),considering the curing age (3,7,14,21,28,60,and 150 d) and strength gra
Proven research output on the behavior of structures made of waste copper slag concrete can improve its utilization in the construction industry and thereby help to develop a sustainable built environment.Although numerous studies on waste copper slag con
An investigation on chloride ingress and macro-cell corrosion of steel bars in concrete made with recycled brick aggregate (RBA) was carried out.As control cases,virgin brick aggregate (BA) and stone aggregate (SA)were also investigated.Both cylindrical a
This paper studied the effect of incorporation of carbon nanotubes (CNTs) in carbon fiber reinforced polymer (CFRP) on strengthening of reinforced concrete (RC) beams.The RC beams were prepared,strengthened in flexure by extemally bonded CFRP or CNTs-modi
We present a three-dimensional (3D) numerical model to investigate complex fracture behavior using cohesive elements.An efficient packing algorithm is employed to create the mesoscale model of heterogeneous capsule-based self-healing concrete.Spherical ag
To study the behavior of coral aggregate concrete (CAC) column under axial and eccentric compression,the compression behavior of CAC column with different types of steel and initial eccentricity (ei) were tested,and the deformation behavior and ultimate b