Study on SO_2 Removal Efficiency by Nanosecond Rising Edge Pulse DBD Under Different Environmental C

来源 :Plasma Science and Technology | 被引量 : 0次 | 上传用户:harvy_chen
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this paper,an experimental study on SO_2 removal by nanosecond rising edgepulse dielectric barrier discharge (DBD) plasma,generated by multi-needle-to-plane electrodes,iscarried out.The mechanism of the effect of various factors,such as gap size between dielectricbarrier and discharge needles,environmental humidity,and inlet speed of gas flow upon the removalefficiency of air purification is analyzed.The studies show that SO_2 removal efficiency improveswith the increase in the gap size between dielectric barrier and discharge needles in the case ofa fixed space between two electrodes,and also improves with the increase in the environmentalhumidity.For a mixed gas with a fixed concentration,there is an optimal inlet speed of gas flow,which leads to the best removal efficiency. In this paper, an experimental study on SO_2 removal by nanosecond rising edgepulse dielectric barrier discharge (DBD) plasma, generated by multi-needle-to-plane electrodes, is carried out. The mechanism of the effect of various factors, such as gap size between dielectricbarrier and discharge needles, environmental humidity, and inlet speed of gas flow upon the removalefficiency of air purification is analyzed. the studies show that SO_2 removal efficiency improves with the increase in the gap size between dielectric barrier and discharge needles in the case ofa fixed space between two electrodes, and also improves with the increase in the environmentalhumidity. For a mixed gas with a fixed concentration, there is an optimal inlet speed of gas flow, which leads to the best removal efficiency.
其他文献
采用氩气的TIG焊接法,在工业上已广泛应用,但其热功率低、熔深小,在焊接厚板时不得不采用多层焊,生产率低。而氦弧焊熔深大,甚至超过MIG焊,因而其生产率高(例如日本用氦弧焊
关于高锰钢的沉淀强化处理,我们先后进行过四种类型方法的试验,每一类的方法中又有温度和时间的变化。用普通高锰钢和11种不同合金化方案的高锰钢,作了不同热处理方法实验。
王浦劬北京大学政治发展与政府管理研究所所长(教育部人文社会科学重点研究基地主任),北京大学、复旦大学、吉林大学、中山大学“国家治理协同创新中心”联合主任,北京大学政
Low surface energy layers,proposed application for non-water printing in computerto plate (CTP) technology,are deposited in both continuous wave and pulse radi
中国经济的十大趋势 在未来若干年内,中国经济发展和经济运行将呈现十大趋势: 一是经济运行更加市场化。市场在经济活动中的作用明显增强,成为资源配置的基本机制和基础性力
根据车间生产实际,运用各种数学优化方法优选各项工艺参数;在此基础上,通过加强科学管理与实行优化操作,取得了攀钢雾化提钒提高钒氧化率等方面的显著技术经济效果,本文正是
真空电子器件是由多种金属零件与介质零件相互连接而成的复杂结构。通常使用的连接方法有钎焊、封接和熔焊。本文对钎焊中的某些主要问题进行了必要的讨论。对钨极氩弧焊做了
在GH302合金的萃取μ相电子衍射花样中,(经X射线粉末衍射确定为μ相)出现了μ相空间群为(?)m的-h+k+l(?)3n禁止衍射。例如:[001]带轴中的{100},{200}等衍射斑点,以及{111}带
本报告介绍两种自硬粘结剂的比较结果。(低氮呋喃树脂和油—尿烷树脂)。讨论的中心是不同的砂子,热压强度和发气性问题。控制催化剂的加入量,使自硬砂的起模时间在45—60分钟
从江生态文化保护中心是由贵州省黔东南州从江县当地农民摄影家以及一群热爱家园的侗族青年人自发组织的本土公益团队,致力于保护黔东南州少数民族地区生态环境及民族文化的完整性,恢复民族自信心与认同感,推动乡村生态旅游发展,解决当地弱势群体生计问题,实现乡村可持续生活。  为了让每个孩子都能快乐地度过属于自己的节日,从江生态文化保护中心的志愿者伙伴们带着成都彩虹村公益发展中心捐赠的“六一”礼物,走进贵州省黔