据日本消防检定协会的专家来沪讲学介绍,检测动力消防泵需要下列设备:①一套吸水高度为3米的水罐,其容量能供3小时连续放水试验(对于轻型手抬泵,要能同时试验20台以上),并附有盛水的装置;②一套发动机的排气和消音装置;③一只气压计;④一套整流简;⑤一个皮氏管;⑥一个压力计(整流筒和皮氏管用的,最高刻度是受检测泵浦最高送水压力的约 According to the Japan Association of Fire Inspectors to Shanghai to introduce lectures, testing fire pumps need the following equipment: ① a set of 3 meters in height water tank, its capacity for 3 hours continuous water discharge test (light hand lift pump, to be able to At the same time more than 20 tests), and with a water-filled device; ② a set of engine exhaust and muffler; ③ a barometer; ④ a rectifier; ⑤ a Pei’s tube; ⑥ a manometer Tube and Pei’s tube used, the highest scale is measured by the pump to send the maximum pressure of about water