The movement of bedload in subcritical flow produces additional roughness as compared to flow in a rigid bed. The magnitude of this bed load roughness is proportional to the thickness of the sediment layer moving along the bed, the particle size and the sediment concentration. In a supercritical flow, however, further resistance is expected due to the momentum absorption by the high flow velocity. In this study the effect of sediment movement on the flow resistance in supercritical flow was experimentally investigated. The experiments included flows over smooth and rough beds carrying sediment of mean diameters D 50 =2.80, 5.42 and 7.06 mm in a rigid rectangular channel. The results show that the sediment transport may increase the friction factor by up to 90% and 60% in smooth and rough beds, respectively. Bedload extracts its momentum from the flow, which causes a reduction of near bed flow velocity and steeper velocity gradient near the bed resulting in an increase in shear velocity as well as in roughness height. The increase in friction factor is directly related to bedload concentration and particle size. The movement of bedload in subcritical flow produces additional roughness as compared to flow in a rigid bed. The magnitude of this bed load roughness is proportional to the thickness of the sediment layer moving along the bed, the particle size and sediment concentration. In a Yet this resistance contains expected over to the momentum absorption of mean diameters D 50 = 2.80, 5.42 and 7.06 mm in a rigid rectangular channel. The results show that the sediment transport may increase the friction factor by up to 90% and 60% in smooth and rough beds, respectively. from the flow, which causes a reduction of near bed flow velocity and steeper velocity gradient near the bed resulting in an increase in shear velocity as well as in roughness height. The increase in friction factor is directly related to bedload concentration and particle size.