武钢烧结厂有两个烧结车间,一烧车间拥有四台75米~2带式烧结机(1959年投产),三烧车间拥有四台90米~2带式烧结机(1973年投产),使用的主要含铁原料有原生精矿、氧化 (混合)精矿、澳大利亚粉矿及国内粉矿(海南粉,鄂东粉,中和粉);熔剂为石灰石与白云石的混和物,其化学成分见表1。燃料主要为无烟煤,并有部分焦粉。 There are two sintering workshops in WISCO sintering plant. There are four 75m ~ 2 belt sintering machines (put into operation in 1959) in one burning workshop, and four 90m ~ 2 belt sintering machines (put into operation in 1973) in the third burning workshop. The main iron-containing raw materials are primary concentrates, oxidized (mixed) concentrates, Australian fines and domestic fines (Hainan, Edong, and powder); flux is a mixture of limestone and dolomite, the chemical composition See Table 1. The fuel is mainly anthracite, and some coke powder.