作者以 Limberg 皮瓣为基础,设计出一种方法既简单又较为实用的菱形皮瓣,其效果优于 Limberg 及 Dufourmentel 等皮瓣。皮瓣设计附图中 ABCD 表示菱形皮肤缺损区,CDXY 代表本皮瓣设计点。使 CD 线延伸到 E 点,并使 ED=AD。弧线 EF 是以 ED 为半径所作圆的一部份。AF 及 BG 四点是对称的。弧线 EF 中的 X 点代表皮瓣的顶点,此点要根据缺损旁区的皮肤张力而定,如 S 区的皮肤向前推移到 B'点,则在弧线中的 X 点就向 E 点靠近(如 AB'C 为直线则 X 与 E 重迭—译者)。相反,如 S 区张力大,则 X 点即向 F 点靠近。 Based on the Limberg flap, the authors devised a simple and practical diamond flap that outperforms flaps such as Limberg and Dufourmentel. Flap design drawings in the figure ABCD diamond-shaped skin defect area, CDXY on behalf of the flap design. Let the CD line extend to point E and make ED = AD. The arc EF is a part of the circle made with the radius ED. AF and BG four points is symmetrical. The point X in the arc EF represents the apex of the flap, which depends on the skin tension of the parasite, for example, if the skin in zone S is pushed forward to point B ', the point X in the arc goes to E The point is close (if AB'C is a straight line then X and E overlap - translator). On the contrary, if the tension in zone S is large, point X will approach point F