兖州矿务局兴隆庄煤矿1981年投产后,采煤机械化程度很高,但1966年提交的精查报告对构造的控制精度远不能满足实际生产的需要。为此,矿务局于1988年与山东煤田地质公司签订了兴隆庄煤矿七采区地震开发勘探协议书。费用由矿务局更改资金解决。协议规定:查明10km~2范围内落差大于15m的断层,其平面位置摆动不超过50m,落差小于15m的断层尽量查出,并作出相应的交待;控制3号煤层底板起伏情况,其深度误差不超过15m,力争不超过10m,精度上较精查要求要高。 Yanzhou Mining Bureau Xinglongzhuang coal mine put into operation in 1981, the coal mechanization level is very high, but submitted in 1966, the precision inspection report submitted to the structure far can not meet the actual production needs. To this end, the Mining Bureau in 1988 and Shandong Coalfield Geological Company signed Xinglongzhuang coal mine seven mining exploration and exploration agreement. The cost is changed by the Mines Bureau to resolve the funds. According to the agreement, a fault with a drop of more than 15m in the range of 10km ~ 2 shall be identified, and the fault whose plane position does not swing more than 50m and whose drop is less than 15m should be detected as far as possible and corresponding explanations should be given. Controlling the undulation of the floor of No. 3 coal seam, Not more than 15m, and strive not to exceed 10m, precision requirements than the fine check to be high.