第一阶段試驗小結我厂对φ3毫米直柄钻头的沟槽磨削加工工艺进行了试验,初步得出了一些结果,现将其叙述如下: 一、試驗条件1.试验设备:如图1所示,是在6H82万能铣床上装一磨头来实现钻头沟槽的磨削加工。磨头通过三角皮带被一功率为600瓦 Summary of the first phase of the test I plant φ3 mm straight shank drill bit groove grinding process, initially obtained some results, now described as follows: First, the test conditions 1. Test Equipment: As shown in Figure 1 Show, is in the 6H82 universal milling machine with a grinding head to achieve bit groove grinding. Grinding head through the V-belt was a power of 600 watts