牛头刨床由于快移离合器操作不便,给加工零件带来不便。在实践中,我摸索到改进离合器的一点方法,现介绍如下一、传统系统及存在问题 1.传动原理 B 6050牛头刨床工作台的“工作进给——快速移动”的操纵机构。工作台移动动力由右端的棘轮9输入,使双端离合器7获得间隙旋转运动。最后由花键轴8将间隙转动从左端 Shaper due to the quick clutch operation inconvenience, to the processing of parts caused by inconvenience. In practice, I groped to improve the clutch a little method, are introduced as follows First, the traditional system and problems 1. Drive principle B 6050 shaper table “work feed - fast moving” control mechanism. The motive force of the workbench is input by the ratchet 9 at the right end, so that the double-end clutch 7 obtains the rotational movement of the gap. Finally, the spline shaft 8 will be rotated from the left end of the gap