论文部分内容阅读
45吨固态起熔镀锌电炉,有许多优点,它可以固态起熔,也就是不用任何辅助手段在有芯工频感应电炉中直接把固体锌熔化。现就炉体和熔沟的筑炉工艺做一些粗略介绍。一、电炉炉体概况:工频感应电炉,主要由炉壳,炉衬,感应器等三个部件组成。炉壳和炉衬长期运行以来,没有损坏过,但感应器的检修、维护、筑炉却十分频繁。主要缺点是熔沟寿命不稳定,锌环易断裂,熔沟易漏锌等等。这些问题长期以来没有得到很好解决。有时候刚刚筑好的炉,用不上几天,甚至一启动却漏锌,或旧锌环再次起
45 tons of solid-state hot-dip galvanized electric furnace, has many advantages, it can melt the solid state, that is, without any auxiliary means in the core frequency induction furnace directly to the solid zinc melt. Now on the furnace and melting ditch furnace building technology to do some rough introduction. First, the overview of the furnace furnace: Power frequency induction furnace, mainly by the furnace shell, lining, sensors and other three components. Since the furnace shell and lining long-term operation, there is no damage, but the sensor repair, maintenance, building furnace is very frequent. The main disadvantage is the instability of the melting ditch, zinc ring is easy to break, easy to leak ditch zinc and so on. These problems have not been well resolved for a long time. Sometimes just built furnace, spent a few days, or even start a drain zinc, or the old zinc ring again