论文部分内容阅读
我国自行设计、制造、安装的第一座大型油田气处理工厂,于1987年9月25日在中原油田全负荷投料试车一次成功。石油部华东勘察设计研究院承担本项工程的设计;航空部第六○八所、第六○九所负责国产燃气轮机压缩机组和膨胀机组等关键设备的开发研制;石油部六公司、八公司和一公司等单位共同承担了该油田气处理厂的设备制造和安装施工任务。根据当时国内的基本条件,在设计中将涡轮五型航空煤油发动机和ATL-250型氨压缩机,改装成以天然气为驱动介质的离心式压缩机组共4台,其中1台为备用机组。并首次配套研制了FW912C型涡轮膨胀机组两台,膨胀比≥4.05,从而由过去的小膨胀比“浅冷”,
China’s own design, manufacture, installation of the first large oil gas processing plant, on September 25, 1987 in Zhongyuan Oilfield full load test run a success. Huadong Survey and Design Institute of the Ministry of Oil undertakes the design of this project; the Ministry of Aviation No. 608, No. 609 is responsible for the development and manufacture of domestic gas turbine compressor units and expansion units and other key equipment; the Ministry of Petroleum six companies, eight companies and A company and other units shared the oil gas processing plant equipment manufacturing and installation of construction tasks. According to the basic conditions of the time, in the design of the Turbine five aviation kerosene engine and ATL-250 ammonia compressor, converted into natural gas-driven centrifugal compressors for a total of 4 units, of which 1 spare unit. And for the first time supporting the development of two FW912C Turbine Expansion Units, expansion ratio ≥ 4.05, from the previous small expansion than the “light cold”,